- Thermal Insulation
- Fast Installation
- Cost Effective Solution
- Lightweight
Preformed, concentric-rolled glass mineral wool pipe sections
TECH Pipe Section MT 4.2 is the preformed concentric-rolled glass mineral wool pipe section for the insulation of industry process pipelines for diameters from 12.7 mm to 254 mm (1/2" to 10''), exhaust ducts and stacks. Pre-slit to facilitate the opening and fitting over the pipes.
TECH Pipe Section MT 4.2 are light and easy to handle. With a length of 1.2 m, installation time on straight pipes and thermal bridges can be reduced by 20%.
TECH Pipe Section MT 4.2 can be used for service temperatures of up to 500°C.
TECH Pipe Section MT 4.2 are light and easy to handle. With a length of 1.2 m, installation time on straight pipes and thermal bridges can be reduced by 20%.
TECH Pipe Section MT 4.2 can be used for service temperatures of up to 500°C.
Product Performances & Benefits
- Thermal Insulation
- Fast Installation
- Cost Effective Solution
- Lightweight
Characteristics
Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14707, ISO 8497, ISO 13787, EN 13501-1, ASTM C795, EN 14303 and ISO 9001.
Non combustible; Euroclass A2L-s1,d0
Thermal conductivities
|
T [°C] |
10 | 50 | 100 | 200 | 300 | 400 | 500 |
|
λD [W / (m.k)] |
0.033 | 0.036 | 0.043 | 0.062 | 0.092 | 0.130 | 0.179 |
Maximum Service Temperature
Tmax = 500 °C under 500 Pa
Behaviour in fire
Non combustible; Euroclass A2L-s1,d0
Chemical behaviour
- AS-Quality
- Do not contribute to corrosion of stainless steel
Other information
Quality, Health & Environment
- CE-marked according to EN 14303
- ISOVER is certified according to EN ISO 9001 and EN ISO 14001