U TECH Pipe Section MT 4.0 Standard-Plus Performancer - Isover

U TECH Pipe Section MT 4.0

  • High Service Temperatures
  • Cost Effective Solution
  • Thermal Insulation
  • Fast Installation
  • Nuclear Plant Quality
  • Fire Reaction
U TECH Pipe Section Mat MT 4.0

U TECH Pipe Section Mat MT 4.0

The ULTIMATE solution for industry pipe insulation

ULTIMATE U TECH Pipe Section MT 4.0 is the efficient and light alternative for the insulation of industry process pipelines for standard pipe diameters from 15 mm to 356 mm (1/2" to  14"), exhaust ducts and stacks. The ULTIMATE mineral wool preformed concentric-rolled pipe section is equipped with a pre-slit to facilitate the opening and fitting over the pipes.

U TECH Pipe Section MT 4.0 are light and easy to handle. With a length of 1.2m, installation time on straight pipes and thermal bridges threw joints can be reduced by 20%.

U TECH Pipe Section MT 4.0 can be used for service temperatures of up to 660°C.

Product Performances & Benefits

  • High Service Temperatures
  • Cost Effective Solution
  • Thermal Insulation
  • Fast Installation
  • Nuclear Plant Quality
  • Fire Reaction

Characteristics

Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14707, ASTM C411, ISO 8497, ISO 13787, ISO 10456, EN 13501-1, ASTM E84, AGI Q 132, EN 13468, ASTM C795, EN 1609, EN 14303, VDI 2055 and ISO 9001.

Thermal conductivities

[°C]

40

50

100

150

200

300

λD [W / (m.k)]

0.035

0.037

0.043

0.052

0.062

0.089

Maximum Service Temperature

Tmax = 660 °C under 500 Pa
Tmax = 700 °C

Specific Thermal capacity

1,03 [kJ/(kg•K)]

Behaviour in fire

  • Non combustible; Euroclass A1L
  • Fire Spread Index = 0; Smoke Development Index < 20
  • IMO-Resolution MSC.61(67); IMO MSC/Circ. 1120

Chemical behaviour

  • AS-Quality
  • Leachable chloride content less than 10 ppm (CL10)
  • Do not contribute to corrosion of stainless steel
  • No short term water absorption by partial immersion (WS1)

Other information

Quality, Health & Environment

  • CE-marked according to EN 14303
  • Quality control according to VDI 2055
  • ISOVER is certified according to EN ISO 9001 and EN ISO 14001