Glass wool

TECH Pipe Section MT 4.0
Preformed, concentric-rolled glass mineral wool pipe sections
Read more
Read less

Description

TECH Pipe Section MT 4.0 is the preformed concentric-rolled glass mineral wool pipe section for the insulation of industry process pipelines for diameters from 12.7 mm to 254 mm (1/2'' to 10''), exhaust ducts and stacks. Pre-slit to facilitate the opening and fitting over the pipes, TECH Pipe Section MT 4.0 are light and easy to handle. With a length of 1.2 m, installation time on straight pipes and thermal bridges can be reduced by 20%. 

TECH Pipe Section MT 4.0 can be used for service temperatures of up to 400°C.

Key Benefits

  • Sound absorption
  • Easy handling
  • Cost effective solution
  • Fire reaction
  • Fast installation
  • Lightweight

Technical Characteristics

Symbol Unit Quantities and declared values Standard
Specific thermal capacity Symbolc UnitkJ/(kg·K) Quantities and declared values1.03 StandardISO 10456
Reaction to fire Symbol- Unit- Quantities and declared valuesNon combustible; Euroclass A1L Fire Spread Index = 0; Smoke Development Index < 20 StandardEN 13501-1 ASTM E84
Water behaviour SymbolWS Unitkg/m² Quantities and declared values   No short term water absorption by partial immersion (WS1 ≤ 1 kg/m2) StandardEN 13472
Chemical behaviour Symbol- Unit- Quantities and declared valuesLeachable chloride content less than 10 ppm (CL10) Do not contribute to corrosion of stainless steel StandardEN 13468 ASTM C795/871
Application field Quantities and declared valuesProduct for use in technical applications, such as small diameter pipes, exhaust ducts and stacks, with need for: thermal and/or acoustic insulation performances especially at medium temperatures StandardEN 14303
Material Quantities and declared valuesGlass mineral wool, preformed concentric-rolled in shape of pipe section. With quality marks EUCEB, unrisky regarding health according to regulation EC No 1272/2008 Note Q StandardCINI 2.1.03
Miscellaneous Quantities and declared valuesDesignation code: MW-EN 14303-T8/T9-ST(+)400-WS1 StandardEN 14303
Quality management Quantities and declared valuesCE-marked according to EN 14303 ISOVER is certified according to EN ISO 9001 and EN ISO 14001 StandardEN 14303 EN ISO 9001 EN ISO 14001

Thermal Conductivity

Characteristic Symbol Unit Quantities and declared values Standard
CharacteristicThermal conductivity SymbolT Unit[°C] Quantities and declared values50 Quantities and declared values_100 Quantities and declared values__150 Quantities and declared values___200 Quantities and declared values____250 Quantities and declared values_____300 Quantities and declared values______- StandardISO 8497
EN ISO 13787
Symbolλ Unit[W/(m•K)] Quantities and declared values0.037 Quantities and declared values_0.045 Quantities and declared values__0.053 Quantities and declared values___0.065 Quantities and declared values____0.080 Quantities and declared values_____0.095
CharacteristicThermal behaviour SymbolT Unit[°C] Quantities and declared valuesMaximum service temperature 400 (under 500 Pa) StandardEN 14707

Standard Dimensions

Thickness d [mm]
Thickness d [mm]30
Thickness d [mm]40
Thickness d [mm]50
Thickness d [mm]60
Notes
* The information refers to linear meters / pack.
All dimensions require minimum order quantities / other dimensions on request.

Documents

TECH Pipe Section MT 4.0
TDS_TECH_Pipe_Section_MT_4.0.pdf
.pdf | 826.24 KB
View
Download
TECH Pipe Section MT 4.0
ISOVER_Brochure_Designing_acoustics_in_Industry.pdf
.pdf | 6.40 MB
View
Download
TECH Pipe Section MT 4.0
ISOVER_Brochure_TechCalc_2.0.pdf
.pdf | 1.33 MB
View
Download
TECH Pipe Section MT 4.0
ISOVER_Techcalc_Userguide.pdf
.pdf | 14.75 MB
View
Download
TECH Pipe Section MT 4.0
Industry_Technical_Manual.pdf
.pdf | 55.90 MB
View
Download
TECH Pipe Section MT 4.0
SUIS_Glasswool.pdf
.pdf | 321.80 KB
View
Download