Description
TECH Lamella Mat 2.1 is the flexible-to-use and time-saving alternative for the insulation of big diameter pipes, tanks and vessels, exhaust ducts and stacks or other curved structures. They can usually be installed without support structures independent of the pipe diameter (>DN 400 recommended).
TECH Lamella Mat 2.1 is offering classic-plus thermal performance for a maximum service temperature up to 250°C.
TECH Lamella Mat 2.1 Alu2 is faced with a reinforced aluminium foil acting as vapour barrier and improves mechanical strength for easy and fast bending.
TECH Lamella Mat 2.1 is offering classic-plus thermal performance for a maximum service temperature up to 250°C.
TECH Lamella Mat 2.1 Alu2 is faced with a reinforced aluminium foil acting as vapour barrier and improves mechanical strength for easy and fast bending.
Key Benefits
- Mechanical resistance
- Fast installation
- Sound absorption
- On demand
Technical Characteristics
| Symbol | Unit | Quantities and declared values | Standard | |
|---|---|---|---|---|
| Specific thermal capacity | Symbolc | UnitkJ/(kg·K) | Quantities and declared values1.03 | StandardISO 10456 |
| Reaction to fire | Symbol- | Unit- | Quantities and declared valuesEuroclass A2-s1, d0 | StandardEN 13501-1 |
| Water behaviour | SymbolWS | Unitkg/m² | Quantities and declared values No short term water absorption by partial immersion (WS1 ≤ 1 kg/m2) | StandardEN ISO 29767 |
| Chemical behaviour | Symbol- | Unit- | Quantities and declared valuesAS-quality (Leachable Chloride ≤10ppm) Do not contribute to corrosion of stainless steel Leachable chloride content less than 10 ppm (CL10) | StandardAGI Q 132 ASTM C795/871 EN 13468 |
| Application field | Quantities and declared valuesProduct for use in technical applications, such as big diameter pipes, tanks and vessels, exhaust ducts and stacks or others curved structures | StandardEN 14303 | ||
| Material | Quantities and declared valuesStone mineral wool, with general orientation of the fibers perpendicular to product's surface With quality marks EUCEB, unrisky regarding health according to regulation EC No 1272/2008 Note Q | StandardCINI 2.2.05 | ||
| Facing | Quantities and declared valuesOn request: Reinforced aluminium facing (Alu2) | Standard- | ||
| Miscellaneous | Quantities and declared valuesDesignation code : MW-EN 14303-T4-ST(+)205-WS1-CL10 | StandardEN 14303 | ||
| Quality management | Quantities and declared valuesCE-marked according to EN 14303 ISOVER is certified according to EN ISO 9001 and EN ISO 14001 | StandardEN 14303 EN ISO 9001 EN ISO 14001 |
Thermal Conductivity
| Characteristic | Symbol | Unit | Quantities and declared values | Standard | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CharacteristicThermal conductivity | SymbolT | Unit[°C] | Quantities and declared values10 | Quantities and declared values_50 | Quantities and declared values__100 | Quantities and declared values___150 | Quantities and declared values____200 | Quantities and declared values_____250 | Quantities and declared values______- | StandardEN 12667 EN ISO 13787 |
||
| Symbolλ | Unit[W/(m•K)] | Quantities and declared values0.040 | Quantities and declared values_0.046 | Quantities and declared values__0.056 | Quantities and declared values___0.069 | Quantities and declared values____0.084 | Quantities and declared values_____0.103 | |||||
| CharacteristicThermal behaviour | SymbolT | Unit[°C] | Quantities and declared valuesMaximum Service Temperature 250 (under 500 Pa) | StandardEN 14706 | ||||||||
Notes
* All dimensions require minimum order quantities / other dimensions on request.
Documents
Related products
TECH Lamella Mat MT 2.0
Compression-resistant flexible glass mineral wool lamella mats