Compression-resistant flexible glass mineral wool lamella mats
TECH Lamella Mat 2.0 is the flexible-to-use and time-saving alternative for the insulation of big diameter pipes, tanks and vessels, exhaust ducts and stacks or other curved structures. With a compressive strength (CS 10) of >= 10 kPa they can usually be installed without support structures independent of the pipe diameter (>DN 400 recommended).
TECH Lamella Mat 2.0 is offering classic-plus thermal performance for a maximum service temperature up to 400°C.
TECH Lamella Mat 2.0 is faced with a reinforced alumium foil acting as vapour barrier and improves mechanical strength for easy and fast bending.
TECH Lamella Mat 2.0 is offering classic-plus thermal performance for a maximum service temperature up to 400°C.
TECH Lamella Mat 2.0 is faced with a reinforced alumium foil acting as vapour barrier and improves mechanical strength for easy and fast bending.
Product Performances & Benefits
- Mechanical Resistance
- Thermal Insulation
- Fast Installation
- Sound Insulation
- Lightweight
- Sound Absorption
Characteristics
Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14706, EN 12667, ISO 13787, ISO 10456, EN 13501-1, AGI Q 132, EN 13468, ASTM C795, EN 14303 and ISO 9001.
Thermal conductivities
|
T [°C] |
50 |
100 |
150 |
200 |
300 |
400 |
|
λD [W / (m.k)] |
0.045 |
0.054 |
0.065 |
0.079 | 0.120 | 0.180 |
Maximum Service Temperature
Tmax = 400 °C under 500 Pa
Specific Thermal capacity
1,03 [kJ/(kg•K)]Behaviour in fire
Euroclass A2-s1. d0Chemical behaviour
- AS-Quality
- Leachable chloride content less than 10 ppm (CL10)
- Do not contribute to corrosion of stainless steel
- Produced without addition of silicone
Faced on one side with a reinforced aluminium
Other information
Quality, Health & Environment
- CE-marked according to EN 14303
- Quality control according to VDI 2055
- ISOVER is certified according to EN ISO 9001 and EN ISO 14001
Delivery Form / Standard Dimensions / Packaging*
|
Thickness d (mm)
|
Width (mm)
|
Length (mm)
|
m² / Pack
|
Rolls / Pack
|
|---|---|---|---|---|
|
50 |
600 |
5,000 |
6.00 |
2 |
|
60 |
600 |
4,000 |
4.80 |
2 |
|
80 |
600 |
3,000 |
3.60 |
2 |
|
100 |
600 |
2,500 |
3.00 |
2 |