The ULTIMATE solution for premium-plus performance and efficient industry wired mats in medium-high temperatures
ULTIMATE U TECH Wired Mat MT 6.0 X is the efficient and sustainable alternative to heavy-dense industry wired mats. Designed for premium-plus thermal insulation at temperatures of up to 620 ºC, continously and even under tough conditions e.g. mechanical stress like vibrations, U Tech Wired Mat MT 6.0 provides the best combination between thermal efficiency flexibility and light weight. U TECH Wired Mats are stitched on one side using galvanized wire on a galvanized wire mesh.
U TECH Wired Mat MT 6.0 is produced in AS Quality (CL- <=10ppm) for usage when in contact with austenitic steel structures.
On request with stainless steel wire (X) or stainless steel wire and wire mesh (X-X) or yellow glass veil facing (V1) and reinforced aluminium facing (Alu1).
U TECH Wired Mat MT 6.0 is produced in AS Quality (CL- <=10ppm) for usage when in contact with austenitic steel structures.
On request with stainless steel wire (X) or stainless steel wire and wire mesh (X-X) or yellow glass veil facing (V1) and reinforced aluminium facing (Alu1).
Product Performances & Benefits
- Energy Efficiency
- High Service Temperatures
- Thin Solution
- Fast Installation
- Fire Reaction
- Easy Handling
Characteristics
Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14706, ASTM C411, EN 12667, EN 13787, ISO 10456, EN 13501-1, ASTM E84, AGI Q132, EN 13468, ASTM C795, EN 1609, EN 14303, VDI 2055 and ISO 9001.
Thermal Conductivities
|
T [°C] |
10 |
50 |
100 |
150 |
200 |
300 |
400 |
500 |
600 |
|
λD [W / (m.k)] |
0.031 |
0.035 |
0.040 |
0.047 |
0.054 |
0.072 |
0.096 |
0.120 |
0.162 |
Maximum Service Temperature
Tmax = 620 °C under 500 Pa
Tmax = 700 °C
Specific Thermal capacity
1,03 [kJ/(kg•K)]Behaviour in fire
- Non combustible; Euroclass A1
- Fire Spread Index = 0; Smoke Development Index < 20
Chemical behaviour
- AS-Quality
- Leachable chloride content less than 10 ppm (CL10)
- Do not contribute to corrosion of stainless steel
- No short term water absorption by partial immersion (WS1)
On request:
- Reinforced aluminium facing (Alu1)
- Yellow glass veil facing (V1)
Other information
Quality, Health & Environment
- CE-marked according to EN 14303
- Quality control according to VDI 2055
- ISOVER is certified according to EN ISO 9001 and EN ISO 14001
Delivery Form / Standard Dimensions / Packaging*
|
Thickness** d (mm)
|
Width (mm)
|
Length (mm)
|
m² / Pack
|
m² / Pallet | Rolls / Pack | Packs / Pallet |
|---|---|---|---|---|---|---|
|
30 |
600 |
11,000 |
12.00 |
120.000 |
2 |
18 |
|
40 |
600 |
7,500 |
9.00 |
67.500 |
2 |
18 |
|
50 |
600 |
6,000 |
7.20 |
43.200 |
2 |
18 |
|
60 |
600 |
4,300 |
6.00 |
30.000 |
2 |
18 |
|
70 |
600 |
3,700 |
5.16 |
22.188 |
2 |
18 |
|
80 |
600 |
3,300 |
4.44 |
16.428 |
2 |
18 |
|
90 |
600 |
3,000 |
3.96 |
13.068 |
2 |
18 |
|
100 |
600 |
3,000 |
3.60 |
10.800 |
2 |
18 |
|
120 |
600 |
2,500 |
3.00 |
7.500 |
2 |
18 |
*all dimensions require minimum order quantities / other dimensions on request **Under a load of 1,000 Pa