ULTIMATE

U TECH Wired Mat MT 4.0 Alu1/V1/X/X-X

The ULTIMATE solution for light and flexible wired mats in industry applications
Read more
Read less

Description

ULTIMATE U TECH Wired Mat MT 4.0 is the light and flexible alternative to standard industry wired mats. With optimised product weight and high compression ratio at the same time, U TECH Wired Mat MT 4.0 makes transport, site logistics but also mounting and fixing easier and faster. When installed the product provides permanent standard-plus thermal performance even in tough environments at maximum service temperatures up to 560°C. 

U TECH Wired Mat MT 4.0 is produced in AS Quality (CL- ≤ 10 ppm) for usage when in contact with austenitic steel structures. On request with stainless steel wire (X) or stainless steel wire and wire mesh (X-X) or yellow glass veil facing (V1) and reinforced aluminium facing (Alu1).

Key Benefits

  • Sound absorption
  • Fast installation
  • Fire reaction
  • Improved logistics

Technical Characteristics

Symbol Unit Quantities and declared values Standard
Specific thermal capacity Symbolc UnitkJ/(kg.K) Quantities and declared values1.03 StandardISO 10456
Reaction to fire Symbol- Unit- Quantities and declared valuesNon combustible; Euroclass A1 Fire Spread Index = 0; Smoke Development Index < 20 StandardEN 13501-1 ASTM E84
Chemical behaviour Quantities and declared valuesAS-Quality Leachable chloride content less than 10 ppm (CL10) Do not contribute to corrosion of stainless steel No short term water absorption by partial immersion (WS1) StandardAGI Q 132 EN 13468 ASTM C795 EN 1609
Application field Quantities and declared valuesProduct for use in technical applications, such as big diameter pipes, tanks and vessels, exhaust ducts and stacks or other equipments, with need for: thermal and/or acoustic insulation with high performances especially for light weight constructions StandardEN 14303
Material Quantities and declared valuesULTIMATE mineral wool, faced with a metallic wire mesh With quality marks EUCEB and RAL by the Gütegemeinschaft Mineralwolle e. V., unrisky regarding health according to German decree on dangerous substances, decree on prohibition of chemicals and to regulation EC Nº1272/2008 Note Q StandardCINI 2.2.02
Facing Quantities and declared valuesOn request: Reinforced aluminium facing (Alu1) Yellow glass veil facing (V1) Standard-
Miscellaneous Quantities and declared valuesInsulating material identification number: 10.01.02.20.04 MW-EN 14303-T2-ST(+/250)560-WS1-CL10 StandardAGI Q 132 EN 14303
Quality management Quantities and declared valuesCE-marked according to EN 14303 Quality control according to VDI 2055 ISOVER is certified according to EN ISO 9001 and EN ISO 14001 StandardEN 14303 VDI 2055 EN ISO 9001 EN ISO 14001

Thermal Conductivity

Characteristics Symbol Unit Quantities and declared values Standard
CharacteristicsThermal conductivity SymbolT Unit[°C] Quantities and declared values10 Quantities and declared values50 Quantities and declared values100 Quantities and declared values200 Quantities and declared values300 Quantities and declared values400 Quantities and declared values500 StandardEN 12667
ISO 13787
Symbolλ Unit[W/(m•K)] Quantities and declared values0,033 Quantities and declared values0,037 Quantities and declared values0,045 Quantities and declared values0,063 Quantities and declared values0,088 Quantities and declared values0,122 Quantities and declared values0,163
CharacteristicsThermal behaviour SymbolT Unit[°C] Quantities and declared valuesMaximum service temperature 560 (under 250 Pa)
Maximum service temperature 650
StandardEN 14706
ASTM C411

Acoustic Parameters

Characteristic Symbol Unit Quantities and declared values Thickness [mm] Standard
CharacteristicSound absorption* Symbolαp UnitHz Quantities and declared valuesαw Quantities and declared values125 Quantities and declared values250 Quantities and declared values500 Quantities and declared values1,000 Quantities and declared values2,000 Quantities and declared values4,000 Thickness [mm]- StandardEN ISO 11654
EN ISO 354
Unit- Quantities and declared values1.00 Quantities and declared values0.24 Quantities and declared values0.94 Quantities and declared values1.15 Quantities and declared values1.08 Quantities and declared values1.04 Quantities and declared values1.09 Thickness [mm]50
Unit Quantities and declared values1.00 Quantities and declared values0.86 Quantities and declared values1.05 Quantities and declared values1.01 Quantities and declared values1.03 Quantities and declared values1.07 Quantities and declared values1.10 Thickness [mm]100
CharacteristicAirflow resistivity* SymbolAFR (σ) UnitkPa·s/m2 Quantities and declared values> 30 Thickness [mm]> 30 StandardISO 9053-1

Standard Dimensions

Thickness** d [mm] Width b [mm] Length [mm] m2/pack slabs/pack packs/pallet
Thickness** d [mm]30 Width b [mm]600 Length [mm]11,000 m2/pack13.20 slabs/pack18 packs/pallet238
Thickness** d [mm]40 Width b [mm]600 Length [mm]9,500 m2/pack11.40 slabs/pack18 packs/pallet205
Thickness** d [mm]50 Width b [mm]600 Length [mm]7,500 m2/pack9.00 slabs/pack18 packs/pallet162
Thickness** d [mm]60 Width b [mm]600 Length [mm]6,300 m2/pack7.56 slabs/pack18 packs/pallet136
Thickness** d [mm]80 Width b [mm]600 Length [mm]4,700 m2/pack5.64 slabs/pack18 packs/pallet102
Thickness** d [mm]100 Width b [mm]600 Length [mm]4,000 m2/pack4.80 slabs/pack18 packs/pallet86
Thickness** d [mm]120 Width b [mm]600 Length [mm]3,300 m2/pack3.96 slabs/pack18 packs/pallet71
Notes
* All dimensions require minimum order quantities / other dimensions on request.
** Under a load of 1,000 Pa.