ULTIMATE mineral wool provides a unique high-performance profile:
It combines safety, comfort and ease of handling.
- Fire resistance
- Sound absorption
- Recycled glass
|Symbol||Unit||Quantities and declared values||Standard|
|Specific thermal capacity||Symbolc||UnitkJ/(kg·K)||Quantities and declared values1.00||StandardISO 10456|
|Reaction to fire||Symbol-||Unit-||Quantities and declared valuesMelting point according to DIN 4102, part 17: ¨ 1000 °C. Non combustible according to IMO-Resolution MSC.61(67)-(FTP- Code), IMO MSC/Circ. 1120. Homologated for shipbuilding according to EC Type Examination Certificate Nr.: 114.542 U SeaProtect Slab 90: certifi ed construction for A 60 (floating floor) 100.185; top-layer only according to static calculation||StandardDIN 4102 IMO|
|Chemical behaviour||Quantities and declared valuesSulphide free Low chloride content on demand. Water repellent content on demand||Standard-|
|Application field||Quantities and declared valuesThermal insulation, acoustic insulation and fire protection constructions in shipbuilding|
|Material||Quantities and declared valuesMineral wool with quality mark RAL by the Gütegemeinschaft Mineralwolle e.V., unrisky regarding health according to German decree on dangerous substances, decree on prohibition of chemicals and to guideline EU 97/69 Nota Q.|
|Facing||Quantities and declared valuesAlu-coated glass fabric, with aluminium side outside|
|Water vapour diffusion resistance factor||Symbolμ||Quantities and declared values– 1.0||StandardEN 12086|
|Thermal coefficient of expansion||Symbolα||Unit1/K||Quantities and declared valuesNo change in dimensions within the application field.||Standard-|
|Dynamic Stiffness||Symbols’||UnitM•N/m3||Quantities and declared values≤ 7|
|Instructions for transformation||Symbol-||Unit-||Quantities and declared valuesCan be cut and punched. Due to the differentiation of density optimal delivery forms are possible for each application field.|
|Instructions for use||Quantities and declared valuesCan be cut and punched Due to the differentiation of density optimal delivery forms are possible for each application field|
|Quality management||Quantities and declared valuesISOVER is certified according to DIN EN ISO 9001 and DIN EN ISO 14001||StandardEN ISO 9001 EN ISO 14001|
|Characteristic||Symbol||Unit||Quantities and declared values||Standard|
|CharacteristicThermal conductivity||SymbolT||Unit[°C]||Quantities and declared values10||Quantities and declared values50||Quantities and declared values100||Quantities and declared values150||Quantities and declared values200||Quantities and declared values300||Quantities and declared values400||Quantities and declared values-||StandardDIN EN 12667|
|SymbolλN,R||Unit[W/(m•K)]||Quantities and declared values0.031||Quantities and declared values0.035||Quantities and declared values0.040||Quantities and declared values0.046||Quantities and declared values0.054||Quantities and declared values0.070||Quantities and declared values0.091||Quantities and declared values-|
|CharacteristicThermal behaviour||SymbolT||Unit[°C]||Quantities and declared values≤ 650 by pure thermal stress (U SeaProtect Slab 40 – 100) ≤ 550 by pure thermal stress (U SeaProtect Slab 24 – 40) U SeaProtect Slab: The thickness of the insulating layer has to be correctly dimensioned so that the faced side is exposed to a maximum of 100 °C. From 150 °C on the binder starts to volatilise.||StandardAGI Q 132|
Air Flow Resistivity
|Characteristic||Symbol||Unit||Quantities and declared values||Values||Standard|
|CharacteristicAir flow resistivity||Symbolσ||Unit[KPa• s/m2]||Quantities and declared valuesDensity 90 kg/m3||Values100||StandardEN 29053|
|Thickness d [mm]||Width b [mm]||Length [mm]|
|Thickness d [mm]30||Width b [mm]625||Length [mm]1200|
|Thickness d [mm]40||Width b [mm]625||Length [mm]1200|
|Thickness d [mm]50||Width b [mm]625||Length [mm]1200|
|Thickness d [mm]60||Width b [mm]625||Length [mm]1200|
* On some products, minimum order quantities are requested.
** Further dimensions on request.
** Further dimensions on request.