CLIMAVER® NETO

  • Fast installation
  • Effective acoustic protection
  • Thermal insulation
  • Lightweight
CLIMAVER NETO ELBOW

CLIMAVER NETO ELBOW

CLIMAVER NETO (2)

CLIMAVER NETO (2)

Silence and comfort

CLIMAVER® Neto self-supporting duct system for the distribution of air in ventilation, heating and cooling systems, especially where acoustic and interior cleaning and fire safety requirements are high.

Characteristics

  • High-density glass wool panel with a outer lining of aluminium reinforced with a glass fibre mesh, kraft paper and a glass mesh to ensure rigidity , inner lining with high mechanical resistance woven black glass fabric.
  • Manufactured from inorganic  chemically biosoluble materials and do not include anything that would have effect on corrosion and shall not facilitate microbial growth.
  • Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14303, EN 13403, EN ISO 354,EN 13501-1 EN 15715, EN 12667,EN 12939, EN 12086, EN 1604, and EN 12237

Thermal Conductivity

T [°C]

10

20

40

60

λD [W / (m.k)]

0.032

0.033

0.036

0.038

Reaction to fire

Euroclass B-s1, d0

Resistance to pressure

800 Pa

Water-vapour diffusion resistance

>140 m².h.Pa/mg (from the facing)

Air tightness

D class

Dimensional stability

< 1%

Acoustics

  • Acoustic absorption coefficient

Hz

125

250

500

1000

2000

4000

α

0.35

0.65

0.75

0.85

0.90

0.90

 
  • Acoustic attenuation(*) on a Climaver Neto straight section.
Section (mm)
Frequency (Hz)
125
250
500
1000
2000
4000

200 x 200

4.83

11.49

14.04

16.73

18.12

18.12

300 x 400

2.82

 6.70 

 8.19

9.76

10.57

10.57

400 x 500

2.17

 5.17

6.32

7.53

8.15

8.15

400 x 700

1.90

4.51

5.51 

6.57

 7.12

7.12

500 x 1000

1.45

3.45

4.21

5.02

 5.44

5.44

(*)Acoustic attenuation (DL, in dB/m) estimated via: DL=1.05·αp1.4 ·P/S (αp: sound absorption coefficient, P and S: perimeter and duct section).  For the sound power of a ventilator with a 20,000 m3/h flow, load loss 15 mm.w.g. 

Pressure  loss

For normal HVAC systems air speed pressure drops are similar to metal ducts ,ASHRAE charts for metal ducts can be used

Other information

  • Mechanical strength: duct is durable and can stand static pressure without reinforcemets up to 800Pa 
  • The interior facing has a high mechanical resistance, meaning that the duct can be cleaned using the most aggressive methods, such as nylon brushing
  • Textile frame: total sound wave permeability and absence of perforations to avoid dust accumulations
  • Marking of SDM guide lines: points of reference for the construction of duct layouts using the Straight Duct Method, or SDM

Logistics

Dimensions (m)
Thickness (mm)
m2 / package
m2 / pallet
m2 / truck
Length
Width

3.00

1.19

25

24.99

299.88

2,399

Operating conditions

  • Application as EN 13403
  • Maximum air speed : 18 m/s
  • Maximum temperature of circulating air: 90°C
  • Maximum external air temperature 60ºC
  • Maximum Static pressure: 800 Pa (80 mm w.g.)

Assembly

Although there are other assembly methods, the recommended method is the “Straight Duct Method”, SDM. This method is based in the use of a straight duct as the basis to obtain duct fittings, and, therefore, the ductwork. The Straight Duct Method uses two types of accessories:
  • CLIMAVER tools: CLIMAVER MM, used to groove the panel so that it can be folded into the duct section, and CLIMAVER SDM, used to cut the straight duct and obtain the pieces that will be used to make duct fittings.
  • CLIMAVER Glue and CLIMAVER Tape: These are used to seal joints when making duct fittings. CLIMAVER Glue has been specially developed to glue glass wool. CLIMAVER tape is made of pure aluminium, 50μm thick and 65 mm wide