The ULTIMATE solution for premium performance and light wired mats
ULTIMATE U TECH Wired Mat MT 5.0 is the efficient but sill light alternative to higher-dense industry wired mats. With optimised product weight and high compression ratio at the same time U TECH Wired Mat MT 5.0 makes transport, site logistics but also mounting and fixing easier and faster. When installed the product provides permanent premium thermal performance even in tough environments at maximum service temperatures up to 540 ºC. U TECH Wired Mats are stitched on one side using galvanized wire on a galvanized wire mesh.
U TECH Wired Mat MT 5.0 is produced in AS Quality (CL- <=10ppm) for usage when in contact with austenitic steel structures.
On request with stainless steel wire (X) or stainless steel wire and wire mesh (X-X) or yellow glass veil facing (V1) and reinforced aluminium facing (Alu1).
U TECH Wired Mat MT 5.0 is produced in AS Quality (CL- <=10ppm) for usage when in contact with austenitic steel structures.
On request with stainless steel wire (X) or stainless steel wire and wire mesh (X-X) or yellow glass veil facing (V1) and reinforced aluminium facing (Alu1).
Product Performances & Benefits
- Energy Efficiency
- Cost Effective Solution
- Fast Installation
- Easy Handling
- Fire Reaction
- Improved Logistics
Characteristics
Technical characteristics in compliance with applicable regulations.This section features all the technical characteristics required for references standards: EN 14706, ASTM C411, EN 12667, EN 13787, ISO 10456, EN 13501-1, ASTM E84, AGI Q132, EN 13468, ASTM C795, EN 1609, EN 14303, VDI 2055 and ISO 9001.
Thermal Conductivities
|
T [°C] |
10 |
50 |
100 |
150 |
200 |
300 |
400 |
500 |
|
λD [W / (m.k)] |
0.031 |
0.036 |
0.041 |
0.049 |
0.057 |
0.078 |
0.104 |
0.138 |
Maximum Service Temperature
Tmax = 540 °C under 500 Pa
Tmax = 700 °C
Specific Thermal capacity
1,03 [kJ/(kg•K)]Behaviour in fire
- Non combustible; Euroclass A1
- Fire Spread Index = 0; Smoke Development Index < 20
Chemical behaviour
- AS-Quality
- Leachable chloride content less than 10 ppm (CL10)
- Do not contribute to corrosion of stainless steel
- No short term water absorption by partial immersion (WS1)
On request:
- Reinforced aluminium facing (Alu1)
- Yellow glass veil facing (V1)
Other information
Quality, Health & Environment
- CE-marked according to EN 14303
- Quality control according to VDI 2055
- ISOVER has been certified according EN ISO 9001
Delivery Form / Standard Dimensions / Packaging*
|
Thickness** d (mm)
|
Width (mm)
|
Length (mm)
|
m² / Pack
|
m² / Pallet | Rolls / Pack | Packs / Pallet |
|---|---|---|---|---|---|---|
|
30 |
600 |
10,500 |
12.60 |
226.80 |
2 |
18 |
|
40 |
600 |
7,900 |
9.48 |
170.64 |
2 |
18 |
|
50 |
600 |
6,300 |
7.56 |
136.08 |
2 |
18 |
|
60 |
600 |
5,200 |
6.24 |
112.32 |
2 |
18 |
|
70 |
600 |
4,500 |
5.40 |
97.20 |
2 |
18 |
|
80 |
600 |
3,900 |
4.68 |
84.24 |
2 |
18 |
|
100 |
600 |
3,100 |
3.72 |
66.96 |
2 |
18 |
|
120 |
600 |
2,600 |
3.12 |
56.16 |
2 |
18 |
*all dimensions require minimum order quantities / other dimensions on request **Under a load of 1,000 Pa
